Carbon-carbon composites refer to a pure carbon multi-phase structure composed of carbon fibers or their fabrics as the reinforcing phase and chemical vapor infiltration pyrolytic carbon or liquid phase impregnation-carbonized resin carbon, pitch carbon as the matrix. They have the advantages of low density, low thermal expansion coefficient, good high-temperature mechanical properties, and high specific strength, making them candidates for thermal structural components. Sú ľahké, s hustotou 1,65-2,0 g/cm3, čo je len štvrtina hustoty ocele; their mechanical properties increase with temperature (up to 2200°C), making them engineering materials that can maintain high-temperature strength above 2200°C; majú malý koeficient lineárnej rozťažnosti a dobrú rozmerovú stabilitu pri vysokej teplote; vynikajúca ablačná odolnosť; vysoká odolnosť proti poškodeniu a dobrá odolnosť proti tepelným šokom; dobré trecie vlastnosti so stabilným koeficientom trenia, ktorý je možné nastaviť v rozsahu 0,2-0,45; vysoká nosnosť, vysoká kapacita preťaženia a schopnosť dlhodobo odolávať teplotám pod 3200 °C bez lepenia; dlhá životnosť s opotrebením približne 1/3 až 1/7 brzdových materiálov práškovou metalurgiou za rovnakých podmienok; vysoká tepelná vodivosť a veľká merná tepelná kapacita, čo z nich robí vynikajúce materiály pre chladiče; vynikajúca odolnosť proti únave; certain toughness; and easy maintenance. They are widely used in photovoltaic semiconductors, metallurgy, heat treatment, friction structural components, high-temperature structural components, and other fields. Môžu byť poskytnuté v rôznych tvaroch, ako sú dosky, kotúče, valce, nepravidelné štruktúry, skrutky, matice a upevňovacie prvky.
Naša spoločnosť môže prispôsobiť uhlíkovo-uhlíkové kompozitné produkty podľa rôznych technických ukazovateľov a požiadaviek zákazníkov na výkresy.
| Meno | Jednotka | C/C composite material | Remarks | |
| Hrúbka | mm | 1.2-200 | Other specifications | |
| Hustota | g/cm³ | ≤1.8 | ||
| Width/Diameter | mm | ≤1800 | ||
| Length/Height | mm | ≤2400 | ||
| Extension strength | Mpa | ≥90 | ||
| Compressive strength | Mpa | ≥120 | ||
| Thermal conductivity | W/m·k | 1000℃ | ≤35 | |
| 1500℃ | ≤5 | |||
| Carbon content | % | ≥99.80 | ||
| Teplota tepelnej úpravy | ℃ | ≥1800 | ||
| Ash content | ppm | ≤200 | ||